Quote:
Originally Posted by M4D_L33k
Ok guys, i've been playing COD 5 for a couple of weeks now and while i'm getting better something just doesn't feel right.
i can see the other team, i can shoot them before they shoot me...but often nothing happens! no little x, no noise?? they then shoot me and i'm dead! i think it'll be more effective if i take all those bullets, put them in envelopes and post them to the guys i'm trying to shoot, i reckon i'll have a better chance of hitting them first!
i know playing against Aah, FEVER and liewi i'm gonna get more deaths than kills, i can live with that: yesterday i knived someone; nothing! they then turned around and killed me, 10 seconds after i respawned it registered my kill???
so what i need to ask is what kind of internet setup do you guys use? i'm on wireless using the homehub, the wii is in the same room about 2 metres away. I think i can't be THAT bad, so i want to try a different setup, any advice would be most welcome
sorry for the long un 
|
Hi, you could try one of these as your router is already in the same room. It rules out interference on your wireless connection as a problem.
Wii LAN Wired USB Network Adapter - £9.95 : TheGameTrain.com
Also port forwarding may help - nicked this from BT Support:
Does BT Home Hub allow game and application sharing/ port forwarding facilities?
The BT Home Hub has an in-built firewall and can handle game and application sharing/port forwarding for gaming.
To set up these features, please follow the steps given below (based on firmware 6.2.2.6):
Open the BT Home Hub Manager
http://bthomehub.home
Click Advanced
Click Continue to advanced
Click Application Sharing in the menu
Check to see if the game/application is listed in the game or application drop down
If listed, select the relevant game or application and then select the device (eg PC/PSP)
Click Add
This completes the process. If the game/application is not listed, create a new game or an application by selecting the ‘click here’ link in the text and follow the steps given below. You must know the details of your port forward at this stage.
Enter a name for the port forward rule
Select Manual entry
Click Next
Select Protocol > Port range > Translate to (port no) > Trigger port
Click Add
Complete the process using Step 4 described above
This is the ports you need to add:
Allowing TCP and UDP Traffic:
The Wii console may require unrestricted access to several sites across various ports and protocols to function correctly. These addresses and ports vary, and may change in the future without notice. Many software firewalls restrict outbound access. Only if your firewall blocks outbound traffic do you need to enable this traffic:
TCP:
Allow traffic to all destinations on ports: 28910, 29900, 29901, 29920, 80, and 443
UDP:
Allow all traffic to all destinations. (Necessary for peer-to-peer connections and game play).
Please note that by allowing the traffic to the destinations listed above, you are essentially removing a significant amount of firewall protection for your network. While Nintendo provides this information for our consumers' use, it is up to each consumer to determine what security needs they have for their own networks, and to decide how best to configure their network settings to meet those needs.